June 2022 | BBS Automation strengthens MedTech / Life Science capabilities with the acquisition of Kahle Automation
Kahle a BBS CompanyGarching, Caravaggio – June 2022: EQT portfolio company BBS Automation accelerates its MedTech / Life Sciences strategy with the acquisition of Kahle Automation S.r.l. – an Italian supplier of high-speed automation equipment for the MedTech and Life Sciences industries, catering to a wide spectrum of medical applications.
BBS Automation and Kahle Automation – a global automation leader in MedTech / Life Sciences

November 2021 | Medical Device Developments
November-2021 Medical Device Developments CoverA Global Leader in Manufacturing
Kahle Automation was featured in the following article

September 2021 | Drug Development & Delivery
drug development article sept 2021SPECIAL FEATURE – Injection Devices: Designing Simplicity, Safety, & Adherence Into One Delivery System

May 2021 | Corriere Della Sera – Milan Italy

Kahle was featured in articles in the Corriere Della Sera Paper and the Prima Treviglio website as we break ground on our 25,000 square feet expansion of production and office space.

May 2021 | Smithsonian National Museum of American History

One of Kahle Automations founders, Charles Eisler, was recognized in an article written by the Smithsonian about proud Immigrant Inventors who achieved the success and shared their success with the native country men.

October 2020 | Medical Device Developments- 2020 Vol. 2

October 2020 Medical Device Developments Magazine CoverCritical manufacturing for Medical Devices
Kahle Automation was featured in the article

September 2020 | Medical Product Outsourcing (MPO)

MPO Cover September 01 2020Julie Logothetis, President , Kahle Automation was interviewed in the Article: Automatic Pilot: Automation Provides Solutions for Assembly Challenges –Assembly and automation experts discuss the market forces and technology trends affecting the industries.

September 2019 | Medical Product Outsourcing (MPO)

John Wuschner, VP Engineering, Kahle Automation was interviewed in the Article: Assembling with Reliability and Repeatability Through Automation – Progress in assembly and automation technologies enable manufacturers to leverage capabilities such as Industry 40.o and loT for medical device fabrication.

September 2019 | Drug Development & Delivery

Kahle Automation was featured in the Article:
SPECIAL FEATURE: Injection Devices: Wearable, Connectivity & Patient-Centric Designs Empower Self -Administration

August 6, 2019 – Shenzhen China | Kahle is pleased to announce it has entered into a joint venture agreement with Shenzhen Wolf-tech Technology Co., Ltd.

July 2019 | Medical Product & Outsourcing
July 2019 MPOMedical Design & Outsourcing has chosen Julie Logothetis, President of Kahle Automation as one of the “11 Women in Medtech Manufacturing you Should Know” and she discusses why promoting women in manufacturing could lead to more leadership roles

June 21, 2019 | MDM-ATX East Show – New York / Medical Product Outsourcing (MPO)

MDM ATXSam Brusco, associate editor of MPO, speaks with John Wuschner, VP of engineering/quality at Kahle Automation about the company’s evolution over the last century at ATX East in New York City. They also discuss why the company chose to focus solely on automation solutions for the medical, pharmaceutical, and healthcare markets

June 1, 2019 |Kahle Automation Announces the Launch of Its New Website

Celebrating our 100th Anniversary as a worldwide leader of Custom automation. Visit our History page for more information.

September 2018 | Drug Development & Delivery

Drug and Development CoverKahle Automation was featured in the Article:
SPECIAL FEATURE: Injection Devices: As Self-Injections Grow, Drug Delivery Gets Smarter

November 12, 2017 | Medic – Compamed Show – Dusseldorf, Germany / Medical Product Outsourcing (MPO)

The editorial team of Medical Product Outsourcing reached out to several companies who were exhibiting at Medica or Compamed in case you’re unable to see them at the event or are not headed to Germany this year. Review the following questions we served up to Julie Logothetis, president of Kahle Automation and see if the company is a potential manufacturing partner for you.

September, 2016 | Medical Device Developments
September 2016 MDDKahle Automation was featured in the Article:
No Limits in Automation

February 13, 2013 | Kahle DEHP-Free Tubing Assembly and Processing

September 5, 2012 | Putting the Pieces Together – Mark Crawford
Medical Product Outsourcing, September 2012 Issue

June 8, 2010 | MD&M / ATX East 2010 Crossword Answers

January 21, 2010 | High Speed Assembly – Simona Cozzi
Kahle discusses their technology and their high speed Pen Needle System, which achieves speeds of 1400 parts per minute.

September 2, 2009 | The Time is Now – Tim Sohn, Associate Editor
Kahle is featured in Medical Product Outsourcing, September 2009 issue.

September 12, 2008 | The State of Automation Integration – Jennifer Whitney
Kahle is featured in Medical Product Outsourcing, September 2008 Issue.

September 8, 2008 | Five Facts About Assembly Equipment – Joyce Laird
Kahle is featured in the introduction to the Assembly Section of the Canon Communications Annual Medical Device Manufacturer’s Buyers’ Guide.

January 10, 2008 | Developments in Assembly Equipment – Brian Buntz
Kahle is featured in this article regarding “manufacturing sophisticated medical device components”

October 10, 2007 | Quality is the Goal – Simona Cozzi
Kahle IV Catheter Assembly System is featured in Assemblaggio Magazine. Article in Italian.

September 16, 2007 | Perking Up Production – Stacey L. Bell
Julie Logothetis, President, Kahle USA is interviewed to discuss Custom Automation popularity.

July 31, 2007 | Let the System Integrator Lead the Way – Joyce Laird
The benefits of using integrators often outweigh any savings you might realize trying to create an automated system on your own.

March 1, 2007 | On the Trail of Caravaggio – Francine Prose / Photographs by Andrea Pistolesi
Smithsonian Magazine History of Michelangelo Merisi da Caravaggio, namesake of the town Kahle Automation S.r.l. is located in Italy.

February 21, 2007 | Ultrasonic Eye Punching for High Speed PVC Tubing Assembly
Article highlighting Kahle’s High Speed Assembly Equipment and Ultrasonic Eye Punching for Tubing Catheters. Article in Italian. Portion in English.

January 21, 2007 | Cost Is Down, Capabilities Are Up – Joyce Laird
Advanced Design & Manufacturing Premier Issue. Julie Logothetis, President Kahle USA, is interviewed as a featured company for medical device assembly machine builders and integrators.

January 2, 2007 | Assembly Solutions – Antonella Pellegrini
Federico Ceresetti, Managing Director, is interviewed for Assembly Solutions magazine article September 2006. Article in Italian. Portion in English.

March 8, 2006 | Kahle speaks at China Medical Association annual meeting
Kahle speaks at China Medical Association annual meeting

February 23, 2006 | Custom Automation for Pharmaceutical Packaging
Kahle provided insight into custom automation for pharmaceutical packaging for a feature article in Pharmaceutical & Medical Packaging News’s January 2006 issue.

February 6, 2006 | Kahle Exhibits at ATX West 2006

October 25, 2005 | Kahle Automation Under New Ownership

September 22, 2005 | Kahle Introduces Its New Online Project Manager

June 23, 2005 | Commemorative Profile
Commemorative Profile highlighting Kahle appears in the 15th Anniversary issue of
European Medical Device Manufacturer.

June 23, 2005 | Kahle President Interviewed for Industry Magazine’s 15th Anniversary Issue – Corrine Litchfield
European Medical Device Manufacturer’s
15th Anniversary issue features an article on automation.

May 12, 2005 | Automated Assembly for Safety Devices

April 8, 2005 | Kahle Employs Ultrasonic Technology to Improve Tubing Catheter Quality

September 21, 2004 | Kahle Syringe Assembly Machine Featured On Magazine Cover
Kahle’s Insulin Syringe Assembly Machine is highlighted on the cover of Medical Product Outsourcing’s September 2004 issue.